Level Sensors
The S3 level sensor is most common used in Marin application for fuel and water level measurement. S3 is preferred because of its simple, but solid construction. The reed switch technology gives you sufficient resolution down to 7 mm, standard is 21mm.
• Stainless steel 316 or 304
• Standard lengths from 150 to 2000mm, longer sensors available upon request
• IP 67
• BSP 1 ¼ treads
• Available with many different connectors upon request
• European Ohm standard 0-190, US Ohm standard 240-30.
• Available also with 0-20mA, 0.5-4.5 VDC and 0-5 VDC
• Operating temperature -40 to +85 Celcius
The S5 level sensor is most common used in Marin application for fuel and water level measurement. The different from S3 is that this sensor has SAE standard 5 hole fixation. S5 is preferred because of its simple, but solid construction. The reed switch technology gives you sufficient resolution down to 7 mm, standard is 21mm.
• Stainless steel 316 or 304
• Standard lengths from 150 to 2000mm, longer sensors available upon request
• IP 67
• SAE 5 standard 5 hole fixation
• Available with many different connectors upon request
• European Ohm standard 0-190, US Ohm standard 240-30.
• Available also with 0-20mA, 0.5-4.5 VDC and 0-5 VDC
• Operating temperature -40 to +85 Celcius
The TN level sensor is most common used in Marin and Genset application for fuel level measurement. The sensor has SAE standard 5 hole fixation, but is also available with 6 holes. The TN sensor can be delivered with fuel suction and return, suction and return for heater and air ventilation. It comes with various pipe sizes, tailor made solutions can be delivered.
• Stainless steel 316 or 304
• Standard lengths from 150 to 1000mm, longer sensors available upon request
• IP 67
• SAE 5 standard 5 hole fixation, also available with 6 holes
• Available with many different connectors upon request.
• Customized Ohm values, available also with standard European and US values
• Available also with 0-20mA, 0.5-4.5 VDC and 0-5 VDC
• Operating temperature -40 to +85 Celcius
The TNB level sensor is most common used in Marin and Genset application for fuel level measurement. The sensor has bayonet fixation. The TNB sensor can be delivered with fuel suction and return, suction and return for heater and air ventilation. It comes with various pipe sizes, tailor made solutions can be delivered.
• Stainless steel 316 or 304
• Standard lengths from 150 to 1000mm, longer sensors available upon request
• IP 67
• bayonet fixation.
• Available with many different connectors upon request.
• Customized Ohm values, available also with standard European and US values
• Available also with 0-20mA, 0.5-4.5 VDC and 0-5 VDC
• Operating temperature -40 to +85 Celcius
TX3 is the most common fuel level sensor in the trucks and bus industry, almost every large OEM have TX3 as their preferred sensor. Due to its robust design and the float as only moving part, it withstand vibration and other forces even driving in rough terrain. Our sensors can be delivered in large and small series, we can also build single sensors to customers specifications.
• Bayonet fixation
• Suction and return fuel
• Material Aluminum
• Suction and return heater
• Air ventilation
• Level and temperature alarms (optional)
• Electrical connectors to customers specification
• Different signal outputs, Ohm, mA or Volt